About us



Our mission: thirty years of innovation and partnership
1
2
A bridge between local and global
From garage workshops to multinational companies, we help domestic manufacturers access top-quality equipment, while connecting global brands with the Serbian market through 30 years of experience in the tooling industry.
3
Engineering without compromise
From our analogue beginnings in 1995 to the digital era, our focus has always been on solutions that bridge the gap between traditional methods and modern technological demands.
4
A sustainable future for the industry
Through the generational change in 2020, we combine the founder’s experience with fresh vision, fostering the sustainable development of the region through the transfer of knowledge and technology.

About us
“Ingomont” was founded in 1995 by Mr Rade Komatović as an industrial engineering company. It was a very challenging time, marked by the country’s international isolation, when most businesses were failing faster than they were being founded.
In its first seven years, the company focused on designing moulds for plastic injection moulding and metal die casting, and on consulting in this field. It was a long and far from easy road – from fully analogue methods to a cautious move into the digital world (at first with just one computer!). In those years our list of partners was limited to numerous, sadly declining, state-owned manufacturers and a still weak and uncertain private sector whose plants were no bigger than a garage.
In 2002, shortly after the sanctions against the then FR Yugoslavia were lifted, the German company HASCO – one of the world leaders in standard components for plastic injection moulds – entrusted us with its representation. Mr Komatović was appointed the company’s official technical sales representative, and “Ingomont” became its sales partner. Rade Komatović remained in this role until his retirement in November 2020, and “Ingomont” is still HASCO’s only official sales partner in Serbia.
In 2008, the German company Andreas Maier Fellbach (AMF) – one of the world leaders in workholding (manual clamps, magnetic, hydraulic and pneumatic clamping, zero-point systems, etc.) – appointed us as its representative. Naturally, we continue to nurture this partnership today.
In almost three decades, “Ingomont” has worked with manufacturers such as AT Meca (France), ISOVER (Austria) and AMPCO (USA/Netherlands).
In 2020, with Mr Rade Komatović’s retirement, a natural generational change took place. The company was taken over by his son, Nikola, while Rade, as owner, remains on board as a technical consultant.
Our partner portfolio includes around 800 companies of all sizes and capacities. We are known as a reliable partner and are recognised in almost every toolroom and plastic and metal injection moulding company in the region.
In the year we mark our third decade, “Ingomont” wants to keep pace with modern trends. We are open to cooperation with potential manufacturing and sales partners from all over the world, aiming to bring Serbian manufacturers closer to the world – and world manufacturers closer to Serbia. Our new, redesigned website is the central point of contact, from where you can also reach our social media pages and contact us at any time.
In its first seven years, the company focused on designing moulds for plastic injection moulding and metal die casting, and on consulting in this field. It was a long and far from easy road – from fully analogue methods to a cautious move into the digital world (at first with just one computer!). In those years our list of partners was limited to numerous, sadly declining, state-owned manufacturers and a still weak and uncertain private sector whose plants were no bigger than a garage.
In 2002, shortly after the sanctions against the then FR Yugoslavia were lifted, the German company HASCO – one of the world leaders in standard components for plastic injection moulds – entrusted us with its representation. Mr Komatović was appointed the company’s official technical sales representative, and “Ingomont” became its sales partner. Rade Komatović remained in this role until his retirement in November 2020, and “Ingomont” is still HASCO’s only official sales partner in Serbia.
In 2008, the German company Andreas Maier Fellbach (AMF) – one of the world leaders in workholding (manual clamps, magnetic, hydraulic and pneumatic clamping, zero-point systems, etc.) – appointed us as its representative. Naturally, we continue to nurture this partnership today.
In almost three decades, “Ingomont” has worked with manufacturers such as AT Meca (France), ISOVER (Austria) and AMPCO (USA/Netherlands).
In 2020, with Mr Rade Komatović’s retirement, a natural generational change took place. The company was taken over by his son, Nikola, while Rade, as owner, remains on board as a technical consultant.
Our partner portfolio includes around 800 companies of all sizes and capacities. We are known as a reliable partner and are recognised in almost every toolroom and plastic and metal injection moulding company in the region.
In the year we mark our third decade, “Ingomont” wants to keep pace with modern trends. We are open to cooperation with potential manufacturing and sales partners from all over the world, aiming to bring Serbian manufacturers closer to the world – and world manufacturers closer to Serbia. Our new, redesigned website is the central point of contact, from where you can also reach our social media pages and contact us at any time.
Through the years
July 1995:
“Ingomont DOO” is officially founded.
1995-2002:
The company focuses on designing moulds for plastic injection moulding and metal die casting, as well as on consulting in this field.
2002:
Cooperation begins with the German company “HASCO” .
2004–today:
Cooperation with numerous foreign manufacturers such as “AT Meca”, “ISOVER” and “AMPCO”.
2006:
We move from our old office at Kralja Milutina 40 (Belgrade) a few blocks away to Kneginje Zorke 16, where we are still based today.
2008:
Cooperation begins with the German company “Andreas Maier Fellbach”.
2020:
Generational change: Rade Komatović retires but stays involved as a technical consultant. The company is taken over by his son, Nikola.
2025:
“Ingomont” keeps pace with modern trends and opens up opportunities for cooperation with international partners. The redesigned website becomes the central point of contact.
“Ingomont DOO” is officially founded.
1995-2002:
The company focuses on designing moulds for plastic injection moulding and metal die casting, as well as on consulting in this field.
2002:
Cooperation begins with the German company “HASCO” .
2004–today:
Cooperation with numerous foreign manufacturers such as “AT Meca”, “ISOVER” and “AMPCO”.
2006:
We move from our old office at Kralja Milutina 40 (Belgrade) a few blocks away to Kneginje Zorke 16, where we are still based today.
2008:
Cooperation begins with the German company “Andreas Maier Fellbach”.
2020:
Generational change: Rade Komatović retires but stays involved as a technical consultant. The company is taken over by his son, Nikola.
2025:
“Ingomont” keeps pace with modern trends and opens up opportunities for cooperation with international partners. The redesigned website becomes the central point of contact.
Frequently asked questions
As a leading supplier of industrial tooling and equipment, we want to make key information easy to find. Here are the answers to the questions our partners ask most often.
What services does Ingomont offer?
We specialise in distributing tooling for plastic and metal injection moulding, clamping systems (AMF) and standard mould components (HASCO), and we provide technical advice and support in choosing the right equipment.
Are you the official representative of the brands you distribute?
Yes. We have been HASCO’s exclusive partner in Serbia since 2002 and AMF’s official representative since 2008, with full technical and sales support.
Do you only work with large companies?
We work with more than 800 companies of all sizes – from small workshops to multinational corporations – tailoring solutions to each partner.
Do you provide training on working with the products?
We organise training on HASCO and AMF products together with German engineers, both at our premises and at our clients’ sites.
How can I become your partner?
Contact us via the contact form on our website or directly at office@ingomont.rs. Our team will help you choose the best solutions for your needs.
Have any questions?
Feel free to contact us!
If you have any questions about our services or would like more information, please get in touch. We are here to help!
